ultrasonic-flow-meter-for-compressed-air-and-nitrogen-may-do-luu-luong-sieu-am-doi-voi-khi-nen-va-nito.png

TRX-R-5P (25,32A), TRX-R-5P (40-80A), Ultrasonic Flow Meter For Compressed Air and Nitrogen - Máy đo lưu lượng siêu âm Đối với khí nén và nitơ Ultrasonic Flow Meter For Compressed Air and Nitrogen - Máy đo lưu lượng siêu âm Đối với khí nén và nitơ 

Click vào đây nếu bạn có thiết bị muốn sửa chữa!!!

Tính năng, đặc điểm
Một lưu lượng kế mới với chức năng mới (Đầu ra RS485) đã được thêm vào dòng sản phẩm phổ biến của dòng TRX / TRZ.
Nó giúp bạn tiết kiệm năng lượng bằng cách đo và trực quan hóa tốc độ dòng chảy, nhiệt độ và áp suất.

Major specifications

For the specifications not described in the table, please check with the model with the relevant diameter listed in the “Detailed specifications” section above.

Model TRX□□R-C/5P TRZ□□□R-C/5P
Diameter (Nominal diameter) 25,32,40,50,65,80A 100,150,200A
Power source 24VDC±10% (Power consumption: 1.5 W or less)
Measurable Fluids Air (Mainly the air in a factory) or
nitrogen (The configuration can be changed on-site.)
Air (Mainly the air in a factory)
Conversion Normal conversion A flow rate corrected to the normal condition of 0°C and 1 atm.
Standard conversion A flow rate corrected to the standard condition of a specified temperature (configure in the flow meter) and 1 atm.
Display
(when converting) *1
Main display [Forward flow display mode]
Accumulated flow rate: 00000000.0 (m3/h) in 9 digits
Trip accumulated flow rate: 0000000.0 (m3/h) in 8 digits
Instantaneous flow rate: 00000.00 (L/min) in 7 digits
[Forward flow display mode]
Accumulated flow rate: 0000000000 (m3/h) in 10 digits
Trip accumulated flow rate: 000000000 (m3/h) in 9 digits
Instantaneous flow rate: 00000.00 (L/min) in 7 digits
[Forward and reverse flow display mode]
Forward accumulated flow rate: 00000000.0 (m3/h) in 9 digits
Reverse accumulated flow rate: -0000000.0 (m3/h) in 8 digits
Instantaneous flow rate: 00000.00 (L/min) in 7 digits
[Forward and reverse flow display mode]
Forward accumulated flow rate: 0000000000 (m3/h) in 10 digits
Reverse accumulated flow rate: -000000000 (m3/h) in 9 digits
Instantaneous flow rate: 00000.00 (L/min) in 7 digits
Sub display Instantaneous flow rate: 0000.0 (less than 10000 m3/h) in 5 digits; 00000 (10000 m3/h or higher) in 5 digits
Pressure: 0000.0 kPa in 5 digits; Temperature: 00.0°C in 3 digits
Output Current output 1 system: 4 to 20 mA (±0.1mA); Load resistance: 400 Ω or less; Upper output current: 22 mA
Select the output from the instantaneous flow rate, pressure and temperature by pressing a button.
Contact output Nch open-drain output 1 system: Unit pulse (Forward flow); Maximum load: 24 VDC, 50 mA
Output method: Select from Duty (35% to 65% maximum frequency: 10 Hz) or
One-Shot (Select ON time from 50 ms, 100 ms, 125 ms, 250 ms and 500 ms by pressing a button).
Communication *2 1 system: Complies with RS 485 Modbus /RTU
Communication bit rate: Select from 9600 bps, 19200 bps, 38400 bps, 57600 bps and 115200 bps by pressing a button.

*1: In the actual flow measurement setting, the digits of the accumulated flow rate display, instantaneous flow rate display and pulse output vary.
*2: The communication specifications are available on our product website.