rs-series-resistance-substitution-box.png

RS SERIES RESISTANCE SUBSTITUTION BOX

Dich vụ sửa chữa, bảo dưỡng, cải tiến các hệ thống dây chuyền tự động công nghiệp

Data Sheet

The RS Series Resistance Substitution Box is the most commonly used decade box on the market today. The RS Series is not only easier to use, but it is also priced lower than most its competition.

The easy of use and 0.1% accuracy makes the RS Box ideal for daily verification of test equipment before measurements, troubleshooting in the field or on the factory floor. 

One nice feature of the RS Series is that it uses convenient side by side, color coded, thumbwheel switches allowing for direct reading — There is no fumbling with multiple slide or rotary switches. Simply dial in the desired values and use!

Made of high impact plastic and weighing less then a pound, these substituters are very portable and can reduce clutter on a busy lab bench.

RS Series Resistance Substitution Box Basic Specifications

(See datasheet for full specifications)

Model RS-200 RS-201 RS-200W RS-201W RS-200-2W RS-201W-2W RS-RTD
Type Resistance Precision Resistance Wide-Range Resistance Wide-Range Precision Resistance High Power Resistance High-Power / Wide-Range Precision Resistance RTD Simulator
Accuracy ±(1%+25 mΩ) ±(0.1%+25 mΩ)* ±(1%+36 mΩ) ±(0.1%+36 mΩ)* ±(1%+25 mΩ) ±(0.1%+36 mΩ)* ±(0.1%+25 mΩ)
Decades 7 7 9 9 7 9 6
Range 0 - 9,999,999 Ω 0 - 99,999,999.9 Ω 0 - 9,999,999 Ω 0 - 99,999,999.9 Ω 0 - 9,999.99 Ω
Resolution 1 Ω 0.1 Ω 1 Ω 0.1 Ω 0.01 Ω
Ratings 0.5 W (rising to 2.5 W at step 9) 2 W (rising to 10 W at step 9) 0.5 W (rising to 2.5 W at step 9)
Residual ≤0.39 Ω (≤0.056 Ω/decade) ≤0.5 Ω (≤0.056 Ω/decade) ≤0.39 Ω ≤0.5 Ω ≤0.34 Ω
Components Metal film resistors; Manganin wire ≤ 0.9 Ω
Physical A B A B A
 
A 8.1 x 7.9 x 5.6 cm; 184 g (3.2 x 3.1 x 2.2 in; 6.5 oz.)
B 12 x 7.9 x 5.6 cm; 235 g(4.7 x 3.1 x 2.2 in; 8.3 oz)
C 18.8 x 8.4 x 6.4 cm, 410 g (7.4 x 3.3 x 2.5 in, 14 oz)
 
*Accuracy: After subtraction of residual impedance: traceable to SI. For 0.1% models accuracy is ±(0.2%) for ≥ 10 MΩ