3-way-mixing-valve-and-evaporator-1.png

CEM EVAPORATOR W-102A

Dich vụ sửa chữa, bảo dưỡng, cải tiến các hệ thống dây chuyền tự động công nghiệp

3-Way Mixing Valve and Evaporator

  • Accurately controlled gas/liquid mixture
  • Fast response
  • High reproducibility
  • Very stable vapour flow

3-way Mixing Valve and Evaporator

Bronkhorst® model W-102A CEM 3-way Mixing Valve and Evaporator is suited for precise vapour flow delivery, composed by mixing up to 30 g/h H2O (32 g/h IPA) with max. 4 ln/min of carrier gas at operating pressures between vacuum and 100 bar. The temperature controlled mixing device is used in combination with  a (thermal or Coriolis) liquid flow meter and an MFC for carrier gas, together forming a Controlled Evaporation and Mixing (CEM) System.

Technical specifications

Performance

Max. Kv-value

6,6 x 10-2

Max. heating temperature

200°C

 

Mechanical /Electrical specifications

Material (wetted parts)

Stainless steel 316L or comparable

Pressure rating

100 bar(a)

Max. ΔP

5...40 bar (depends on Kv-value; contact your distributor for details)

Process connections

Gas and liquid inlet: compression type or face seal couplings;
Vapour outlet: 1/8" tube (other options on request)

Seals

Metal-to-metal

Plunger

Kalrez®; other on request

Protection class

IP40

Power supply

Mixing valve: +15...24 Vdc +/-10%;
Heater: 44 Vac

Power consumption

Mixing valve: 4 W (max.);
Heater: 150 W (nominal)

Heater capacity

10 W

Connector

Amphenol 6-pin male